Please describe your project to us, and one of our experts will contact you.
IRM07-European Style Cylindrical Wood Burning Stove
Comply with building standards and connections are suitable for any type of installation
Nominal heat output: 8KW
Heating type: Radiant
Fuel: Wood logs
Material: carbon steel, cast iron grate, ceramic glass(NEG or Schott brand), high temperature resistant paint(Forest brand)
Firebox material: carbon steel, vermiculite panels
Primary air: Yes
Secondary air: Yes
Tertiary air: Yes
Ashpan: yes
The wood-burning stove should be installed in rooms with sufficient airflow, which is required for the combustion.
Not every wood-burning stove could be connected to any chimney. Before assembling the wood-burning stove, check if the static pressure and the chimney dimensions conforms to the needed parameters for the wood-burning stove. If the woodburning stove does not conform to the chimney, it will lead to a lower burning rate and polluting the glass with soot.
The floor, where the wood-burning stove is placed, should be flat and horizontal, made of non-combustible materials (mosaic, marble, terracotta, etc.). If the floor is not heat resistant (carpets, linoleums or others of the same kind) a stable, non-combustible platform should be used, made of steel, glass or stone plates.
Height*Width*Depth | 1100*590*490mm |
Nominal heat output at maximum power (kw) | 8kw |
Nominal heat output at minimum power (kw) | 6kw |
Maximum efficiency (%) | 75% |
CO emissions@ 13% O2 | 0.435% |
Room heating capacity | 80㎡ |
Weight (kg) | 140kg |
Flue outlet (MM) | 150 or 180 |
Flue gas temperature | 310℃ |
Mass consumption of the fuel | 2.2KG/h |